This announcement also introduces the WS ProTac XPI headset offering “ambient listening” capability.
FLEX II
The 3M Peltor FLEX II offers a next level of hearing protection and communication for noisy environments, with newly designed speakers and microphone. Enhanced dual mold cups offer a modern, slim look in a vivid yellow for greater visibility in the field. The detachable downlead connector offers high flexibility and the headset is ready for outdoor weather conditions with a water tight, IP68 rating protection on the microphone. Please note the new FLEX II cables must be used with the new FLEX II headsets.
Key Features:
- Newly designed headband
- Bright yellow colour for enhanced visibility
- Slim cup design
- Detachable down lead connector
- Improved speaker efficiency to fit todays digital device
- Water tight microphone (IP68)
- Gel ring approved with headband and helmet attachment options
Download the 3M Peltor FLEX II spec sheet
The 3M Peltor FLEX II range is offered as a direct replacement to the standard headsets in the cancelled FLEX I range. For the cancelled tactical FLEX I headsets, the 3M Peltor WS ProTac XPI headsets are offered as a suggested alternative. XEVA will also be offering both the FLEX II and WS ProTac XPI headsets within our 3M Peltor portfolio.
WS ProTac XPI
The 3M Peltor WS ProTac XPI headset features level-dependent technology offering reliable, noise cancelling by ambient listening and ensuring critical communications even in noisy environments. The headsets are available with either a Bluetooth only or Bluetooth and FLEX II cable connection version. If the Bluetooth variety is chosen then a FLEX II cable is not required.
Key Features:
- Bluetooth 4.2 including MultiPoint
- Bright yellow colour for enhanced visibility
- Auto power off: The headset will turn off after 4 hours of non-use to save battery
- Low battery warning at low battery level
- FLEX II accessory jack on 111 products
Download the WS ProTac XPI headset spec sheet
Key Applications of the 3M Peltor heavy duty headsets include:
- Noisy environments
- Manufacturing
- Construction
- Airports
Here is a breakdown of the cancelled FLEX 1 headsets and their direct replacements or suggested alternative options:
| Cancelled FLEX Product |
Direct Replacement |
Suggested Alternative |
MT53H79P3E-77
3M Peltor FLEX I standard headset with built-in PTT & helmet attachment |
MT74H52P3E-111
3M Peltor FLEX II headset with built-in PTT & helmet attachment |
|
MT53H79B-77
3M Peltor FLEX I standard headset with built-in PTT & neckband |
MT74H52B-111
3M Peltor FLEX II headset with built-in PTT & neckband |
|
MT53H79A-77
3M Peltor FLEX I standard headset with built-in PTT & headband |
MT74H52A-111
3M Peltor FLEX II headset with built-in PTT & headband |
|
MT1H7P3E2-77
3M Peltor FLEX I tactical headset with PTT & helmet attachment |
|
MT15H7P3EWS6
3M Peltor WS ProTac XPI headset with helmet attachment & Bluetooth connectivity
or
MT15H7P3EWS6-111
3M Peltor WS Pro Tac XPI headset with helmet attachment, Bluetooth & FLEX II cable connectivity |
MT1H7F2-77
3M Peltor FLEX I tactical headset with PTT & headband |
|
MT15H7AWS6
3M Peltor WS ProTac XPI headset with headband & Bluetooth connectivity
or
MT15H7AWS6-111
3M Peltor WS ProTac XPI headset with headband attachment, Bluetooth & FLEX II cable connectivity |
MT1H7B2-77
3M Peltor FLEX I tactical headset with PTT & neckband |
|
|
Please note the FLEX II and WS ProTac WPI headsets require the use of the new 3M Peltor FLEX II cables and cannot be used in conjunction with the FLEX I generation cables.
XEVA will continue to sell FLEX I generation cables alongside the new FLEX II cables for the Motorola Solutions, Hytera, Icom and Kenwood ranges. The new FLEX II cables are as follows:
| Part Number |
Description |
| FLX2-63-50 |
3M Peltor FLEX II Cable for Motorola Solutions MOTOTRBO |
| FLX2-65 |
3M Peltor FLEX II Cable for Motorola Solutions GP344 |
| FLX2-32 |
3M Peltor FLEX II Cable for Motorola Solutions GP340 |
| FLX2-21 |
3M Peltor FLEX II Cable for Motorola Solutions GP300/DP1400 |
| FLX2-111 |
3M Peltor FLEX II Cable for Hytera PD7 Series |
| FLX2-35 |
3M Peltor FLEX II Cable for Icom angled 2-pin |
| FLX2-44 |
3M Peltor FLEX II Cable for Icom F31/F41 |
| FLX2-64 |
3M Peltor FLEX II Cable for Icom F34/F44 |
| FLX2-36 |
3M Peltor FLEX II Cable for Kenwood 2-pin |
| FLX2-107-50 |
3M Peltor FLEX II Cable for Kenwood Multipin |
All 3M Peltor products, including the FLEX I, FLEX II and WS ProTac XPI ranges are available on our website, within the Peltor section of our brands and components area.
Please speak to your Account Manager or the Sales Team directly to discuss the new FLEX II and WS ProTac XPI products.
CONTACT US
Click here to email us regarding dealer registration
Or call us on - 01256 40 60 50